sexta-feira, 23 de dezembro de 2011

Alguém tem 2 Jet Cat P200 sobrando por aí?

Se tiver podemos montar um desses!!!!

segunda-feira, 19 de dezembro de 2011

ASA

Para quem gosta de Asa de combate e ou FPV, novo lançamento:
http://www.rc4y.com/skywalker-x8-p-378.html

X8 wing from skywalker factory EPS version

The wing X8, will be released early 2012.

Wing span: 2122mm

Wing area: 80dm2

valid payload: 1000-2000g




terça-feira, 22 de novembro de 2011

segunda-feira, 14 de novembro de 2011

domingo, 6 de novembro de 2011

quarta-feira, 2 de novembro de 2011

quinta-feira, 6 de outubro de 2011

Discurso Steve Jobs Stanford

Feito para a turma de 2005 da Stanford University.
Vale a pena ver ATÉ O FINAL:

quinta-feira, 15 de setembro de 2011

YS120 em estoque na Infinity

http://www.infinity-hobby.com/main/product_info.php?products_id=7422&osCsid=f4e6fbbb82248ebd9c662805fdabfd17


quinta-feira, 1 de setembro de 2011

domingo, 14 de agosto de 2011

segunda-feira, 25 de julho de 2011

Piper J-3 CUB - World Models - DLE 20 cc






Depois de um grande susto no "voo crash" de estréia, resolvi guardar algumas fotos.

Mais uma montagem do Marcelo Tohmé.

Ainda bem que meus amigos insistiram para que eu mandasse consertar.

Ficou Lindão.


Ah!!! uma última coisa, PIPER não é fácil de pilotar... pelo menos prá mim ;) .

PARA QUEM TEM ABRAÇO DE JIBÓIA

sexta-feira, 22 de julho de 2011

Velho comandante

Meninos voem planador, paulistinha, aprendam o elemento intuitivo do ar. Sintam o cheiro da atmosfera.Observem os pássaros, a poeira, a fumaça, as marolas da água, a posição dos animais no campo,o pio Da coruja, os galhos das arvores. Faça seu curso de piloto não apenas pensando na hora a menos que você galgou para o mínimo do PC, mas na hora em que você interagiu com o universo,com as forças da natureza.

A atmosfera, esta fina e tênue camada gasosa formada basicamente por: nitrogênio (78%) e oxigênio (20%) e demais gases,alem do vapor de água é o nosso meio, o nosso sustento. Torricelli no século XVI venceu a gravidade observando a natureza e os pássaros. O homem, este eterno invejoso, decidiu que poderia também voar, o que hoje fazemos das mais diferentes e estranhas maneiras. Atualmente pilotamos o automatismo, deixando de lado os princípios e as leis básicas de pilotagem. Toda força exercida pelo ar sobre qualquer corpo nele imerso, decorre única e exclusivamente dos choques de suas moléculas contra as superfícies externas ou internas deste corpo. Uma conseqüência deste princípio é que todas estas forças sejam elas aerodinâmicas ou aerostáticas e não importando se as chamemos de Sustentação, Empuxo, Arrasto, etc., irão depender apenas da quantidade de moléculas e das velocidades do choque entre estas e as superfícies de um corpo, esteja este ou o ar em repouso ou em movimento.Sintam a natureza, interajam com a maquina, mas nunca se esqueçam que jamais um engenheiro aeronáutico vai superar em seu projeto uma maquina, insuperável ,criada por Deus, Você, homem, piloto.Você é muito melhor do que qualquer maquina jamais construída.

De um colega, comandante das antigas...

terça-feira, 12 de julho de 2011

quinta-feira, 7 de julho de 2011

Collective Pitch RC live show - Hoje às 10PM horário de Brasília

http://www.twirc.tv/ - Hoje às 10PM horário de Brasília

Twirc Overview

Twirc.tv (This Week in Radio Control) was established in early 2010 in order to provide real time online access for the general Radio Control Community to experienced and professional RC Pilots, Drivers, Mariners and other knowledgeable Contributors to the wonderful world of Radio Controlled vehicles.

Twirc commenced with it's very first broadcast on March 01, 2010 which featured Mr Dave Powers (http://www.rcpowers.com/) who at that time, ran his own live internet show based on providing new members to the RC Aircraft Hobby information, build advice, and reviews. Dave continues to provide valued information to the RC Community.

Since those early days we have progressed into interviewing some of the hobby's most esteemed and respected enthusiasts including Factory Pilots and Drivers from most of the world's best known RC Manufacturers.

Currently our Premium Live Show, titled 'Collective Pitch' is hosted by Mr Jan Matros of Mikado Helicopters.

Jan is an expert in the field of RC Helicopters and contributes enormous amounts of his personal time to this increasingly more complex variant of the RC Hobby.

We continue to offer seamless access to all those who wish to participate in the Live Shows via a very user friendly Chatroom and the ability to call in live via Skype and also the ability to have Viewer comments, questions etc. aired during the shows via video, audio, or text.

We also provide updates and notifications of upcoming Shows via our friends Derrick Threatt and Everett Balmores over at RCHeliResource.com and on Twitter and of course on our Facebook page.

We welcome all new Viewers and Participants to TWiRC and hope that you enjoy our service.

Coax MCX Clone

Novo lançamento da HobbyKing:
MCX KILLER! U$ 32.95 !

terça-feira, 14 de junho de 2011

2011 ESKY Three Musketeers for Beginners

XFC 2011 - Só flybarless e elétricos entre os 5 primeiros colocados

1. Jamie Robertson - Logo600 - MIKADO VBAR Flybarless
2. Nick Maxwell - Rave - CURTIS TotalG Flybarless
3. Kyle Dahl - LOGO XXTREME - MIKADO VBAR Flybarless
4. Bobby Watts - X-Cell Whiplash - FUTABA CGY750 Flybarless
5. Kyle Stacy - ALIGN T-REX700E - FUTABA CGY750 Flybarless

domingo, 12 de junho de 2011

Será que esse é melhor que o FUTABA???????













The brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create an immediate impact on any enthusiast.

The 3GX is currently the smallest and lightest flybarless system on the market. Two ports to directly connect Spektrum and JR satellite receivers, along with full support of Futaba’s S-BUS system.

-Suitable for helicopters of all classes from 200 to 700, glow engine or electric powered.

-3GX utilizes a 16-bit processor that is 4-times faster than the previous generation, along with a completely re-written firmware.

-With built in pirouette compensation function, the 3GX is able to stabilize the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flips type of maneuvers are easily accomplished with precision.

-Additional peripherals planned for the 3GX includes a 3-axis accelerometer, 3-axis magnetic compass, and GPS positioning system. While the commonly available position hold gyro system utilizes only 6 sensors, 3GX’s total of 10 sensors ensure positioning of the helicopter with superior accuracy, providing the ultimate solution for aerial photography or other special purposes.

terça-feira, 31 de maio de 2011

Shock Flyer - Sala




8x4

Meus agradecimentos ao fabricante de cola CA.




9x3,8

quinta-feira, 19 de maio de 2011

Heli turbina

Pessoal achei esse video no tube de um Heli fuzelado igual ao do Carlucci e voando com uma turbina Wren Igual a que ele comprou puta coicidencia né!!!.....
http://www.youtube.com/watch?v=yIiUhyZ3ngU&feature=player_embedded#at=11

sábado, 14 de maio de 2011

terça-feira, 10 de maio de 2011

quarta-feira, 20 de abril de 2011

sexta-feira, 15 de abril de 2011


Pessoal,


Hoje estive com o nosso amigo Cleber aqui em Miami. A oficina dele está um show. Os jatos dele são bárbaros, não dá descrever.


Um abraço a todos


Artur Maluf

quinta-feira, 31 de março de 2011

segunda-feira, 28 de março de 2011

GAUI 330X Flip

Era para ser um looping...

terça-feira, 22 de março de 2011

quinta-feira, 17 de março de 2011

sexta-feira, 11 de março de 2011

Quadrelli

Nosso amigo Quadrelli sofreu nesta Quarta-Feira um AVC e está internado no hospital São Luiz do Morumbi.
Assim que tiver novas noticias publico nest post.
Desde já desejando a ele uma pronta recuperação.

Boas notícias, o Quadrelli já está em casa e se recuperando bem.

Abraços,
Affonso

sexta-feira, 4 de março de 2011

terça-feira, 22 de fevereiro de 2011

Vertol



Depois de alguns meses, agora voa !!!

Agradecimentos especiais:

Alexandre - Algumas peças Hirobo
Ricardo Forte - Motor
Clovis Rogano - UBEC


sábado, 12 de fevereiro de 2011

Futaba 7.4V High Volatge Servos

Futaba Japan released first information on a new 7.4V high voltage line of servos. Available as both brushless "BLS" motor and conventional "S" motor servos the items are usable with an input voltage of 6.0V and 7.4V. The BLS156HV, BLS157HV and S3051HV servos also become available as bundles of 4 servos including a Futaba 2.4GHz 8-channel R6208SB S-Bus receiver.
Specifications BLS157HV
- Speed: 0.11sec/60°(7.4V)
- Torque: 37.0kg/cm(7.4V)
- Speed: 0.14sec/60°(6.0V)
- Torque: 31.0kg/cm(6.0V)


Specifications BLS156HV
- Speed: 0.12sec/60°(7.4V)
- Torque: 21.0kg/cm(7.4V)
- Speed: 0.15sec/60°(6.0V)
- Torque: 18.0kg/cm(6.0V

Specifications BLS255HV
- Speed: 0.08sec/60°(7.4V)
- Torque: 12.0kg/cm(7.4V)
- Speed: 0.10sec/60°(6.0V)
- Torque: 10.6kg/cm(6.0V)

Spektrum Air/Heli/Sailplane DX10t

Spektrum Air/Heli/Sailplane DX10t DSM2/DSMX Radio ($1100.00 Due Mid June 2011)
The Spektrum DX10t is an extremely light-weight, universal-application, high-end tray radio. The DX10t is a modular design, so customizing its switch layout for the proper application means no matter what kind of modeler there is, the 10t has everyone covered. It features the next evolution of Spektrum's AirWare software, which has been thoroughly refined and expanded, offering modelers a level of functionally and customization never before available. The DX10t supports up to 10 flight modes in Sailplane mode and 5 flight modes in ACRO and Heli, allowing for an unprecedented amount of user personalization, ideal for competition modelers. The switch modules are interchangeable, and assignable, allowing for customized switch positions depending on user application. The radio will allow for real time telemetry feedback, an SD card reader built in, meaning model transfer and the ability to upgrade the radios software over time. The SD card will also allow for data writing, so information gathered during use will be stored on the card, allowing for an in-depth look at model performance. The DX10t includes the high-speed AR10000 10-channel receiver and a 2500mAh LiPo battery for extended field use.


segunda-feira, 7 de fevereiro de 2011

Do Gran Cara@#$@!!!!

Olhem o novo Blade mCP que está sendo lançado. Pesa 45 g, é flybarless e totalmente acrobático!!! E além do mais, bem barato.....vale à pena ver o vídeo.

quinta-feira, 3 de fevereiro de 2011

segunda-feira, 31 de janeiro de 2011











Mais Fotos





The front of the 2nd stage turbine shaft
carries a specially contoured hardened
and ground spiral bevel gear which
meshes to a sintered high strength spiral bevel crown wheel. The
input shaft is carried on two high precision ceramic high speed
bearings with a light preload. The bearings are lubricated with fuel
exiting from the gearbox area. The reduction ration is 4.285:1 and
the gear assembly is safe to run to 20,000rpm output speed and
85,700rpm input. Normal maximum speed of this shaft plus clutch
and fan would be 15,000rpm and remember most tail rotor assemblies are speed rated for this rpm
so take extra care here.






Wren Turbines











Segue algumas fotos que recebi da fabrica ontem




segunda-feira, 24 de janeiro de 2011

Olhe o brinquedinho e onde ele aterrisa depois da pescaria!!!



Wren Turbines


A.M Product fechou parceria com a Wren turbines, distribuidor exclusivo para o Brasil.

As primeiras já estão a caminho

sexta-feira, 21 de janeiro de 2011

Heli Turbina!!!



Um pouco maior do que os que nós voamos!!!!

quinta-feira, 13 de janeiro de 2011

Asas Elétricas Desconto de 50% nas peças Align

Pessoal recebi um e.mail do Asas , e eles estão em promoção de 50% nas peças Align, e algumas outros itens, Por exemplo :

Curtis Youngblood Radix 710mm Radix blades
[HEL-YEI-YB-710] R$430.00 para R$215.00
Preço lá de fora...

Tipo peças com tubo de cauda do 600( peça chata de compra lá fora

Tail Boom HN6031T
[HEL-HN6031T] R$54.00 para R$27.00

Espero ter ajudado , boa sorte..

quinta-feira, 6 de janeiro de 2011

Marcello, esta é para você!!!

Pipa em alumínio e carbono e custa apenas U$ 320,00!!!!